Supported Linux on Hyper-V 2012, ALL Are 64 BIT ! (http://technet.microsoft.com/en-us/library/hh831531.aspx)
CentOS 5.7 and 5.8, CentOS 6.0 – 6.3 (Download and install Linux Integration Services Version 3.4 for Hyper-V.)
Red Hat Enterprise Linux 5.7 and 5.8, Red Hat Enterprise Linux 6.0 – 6.3 (Download and install Linux Integration Services Version 3.4 for Hyper-V.)
SUSE Linux Enterprise Server 11 SP2 (Integration services do not require a separate installation because they are built-in.
Open SUSE 12.1 (Integration services are built-in.)
Ubuntu 12.04 (Integration services are built-in.)
Dont forget there are Integration Services AND an SCVMM Agent
(http://windowsitpro.com/virtual-machine-manager/deploy-linux-scvmm )
Checking the OS (Red Hat)
Checking Redhat version installed
$ uname -a
Linux server.domain.com 2.4.22-32.ELsmp #1 SMP Mon Apr 15 21:17:59 EDT 2005 i686 i686 i386 GNU/Linux
To get the version in simple terms, check /etc/redhat-release instead.
$ cat /etc/redhat-release
Red Hat Enterprise Linux AS release 3 (Taroon Update 5)
To turn on DHCP for Red Hat
To configure a DHCP client manually, modify the /etc/sysconfig/network file to enable networking and the configuration file for each network device in the /etc/sysconfig/network-scripts directory. In this directory, each device should have a configuration file named ifcfg-eth0, where eth0 is the network device name.
The /etc/sysconfig/network file should contain the following line:
NETWORKING=yes
The NETWORKING variable must be set to yes if you want networking to start at boot time.
The /etc/sysconfig/network-scripts/ifcfg-eth0 file should contain the following lines:
DEVICE=eth0
BOOTPROTO=dhcp
ONBOOT=yes
Other options for the network script include:
DHCP_HOSTNAME — Only use this option if the DHCP server requires the client to specify a hostname before receiving an IP address. (The DHCP server daemon in Red Hat Enterprise Linux does not support this feature.)
PEERDNS=<answer>, where <answer> is one of the following:
yes — Modify /etc/resolv.conf with information from the server. If using DHCP, then yes is the default.
no — Do not modify /etc/resolv.conf.
SRCADDR=<address>, where <address> is the specified source IP address for outgoing packets.
USERCTL=<answer>, where <answer> is one of the following:
yes — Non-root users are allowed to control this device.
no — Non-root users are not allowed to control this device.
No comments:
Post a Comment